Love how clean and straightforward this is all looking! Congrats on the new GFC.
2 Likes
Thank you so much!!! I need to get that camera setup installed this week! Stoked to show off that mount.
1 Like
Installed: Tent Lock
Got the tent lock installed. Works awesome and looks OEM!!
You just need to trim as you see below. I used a dremel which cut it very easily.
Parts:
Reese Towpower 7042100 Adjustable Coupler Catch Lock
3 Likes
Man the Vernacular bedding catch looks so much better than my Amazon net I use, but damn if his products aren’t double the price they should be lol
2 Likes
They are pricey agreed and these come with cheap crappy carabiners too. I upgraded mine.
Installed: Wolfbox Camera
I will get some more photos of the bed pass through once finished. I will not button up the bed pass through yet as I have to make sure I have clearance for my bed storage setup.
Parts:
Wolfbox G900 (Comes with WDR Rear Camera)
G900 Kit
Wolfbox Extension Cable
Extension Cable
Wolfbox OEM Mirror Bracket (Model 1) (Tacoma)
Mirror Bracket
Dongar 12-Pin Type A Adapter (Toyota)
Adapter
Use More Force @Vice_Chief Camera Mount (WDR Camera Only)
Camera Mount
NPT 1/4” Cable Gland
Cable Gland
-Drilling did a pilot hole then used a step bit to slowly cut the opening to size. Be careful as the step bits cut fast.
Step Bit
Step Bits
-Used the grommet under the driver seat as there was already a harness passing through it. Followed the harness frame rail routed all the way into the driver taillight area.
3 Likes
Installs:
Few more mods done.
3D Proto Lab (Panel Handle)
Shittco Bricks (For Poles)
-Confact him on IG @ shittco
Step22 Pangolin Tool Roll came in handy!
5 Likes
More Parts:
No more dirty feet after rinsing off or if I’m changing outside the truck 
.
Also fan that I’ll be using for in the tent when sleeping.
Clean Ocean Designs Mariner Mat
Mat
Claymore V1040 Rechargeable Fan
Fan
7 Likes
Lots of great memories at Devil’s Lake during college!
1 Like
Its a great spot if you go during the week when its not so packed. Its local for me so makes sense and makes you feel like you aren’t in WI.
1 Like
how do you like those sensors on the Devos?
Took some fiddling with to figure out how sensitive they are on what settings I found sgt best to be max sensitive one lowest time. Now that I got it setup I haven’t had many “ghost” sensing the first night I didn’t have it setup correctly or branches were dripping it or maybe there was a bear at my site.
Installed: UMF Lock Locker
@Vice_Chief (UMF: Use More Force) at it again.
Part:
UMF Lock Locker ( Use More Force Lock Locker )
Holds the Reese Latch Lock (“Go To OEM looking Lock”).
5 Likes
Man, that looks great on your build. Thanks for sharing the installed pics!
1 Like
How do you like the Genesis? I have been eyeing that upgrade for a while.
2 Likes