Electrical Connection

[Kwood]

Is this what you are looking for.

How To: Wire 3rd Gen Tacoma 3rd Brake Light

Haven’t seen this posted anywhere yet personally and see a lot of folks ask. How to wire the third brake light on the GFC. (DISCLAIMER!) This is for my 2017 3rd Gen Tacoma. Your Tacoma might be different. If you don’t have a Tacoma it will positively, probably be different. (1) I started by removing my rear, driver side taillight. (Two 10mm Bolts) Circled in photos. (2) I then fished the wiring through the gap in the bedside. Be patient doing this because you don’t want to risk damaging yo…

How to wire GFC brake light (2nd gen Tacoma)

Wiring the brake light is pretty easy. I believe the color of the wires might be different from 1st, 2nd and 3rd gen though. If you have a 1st or 3rd gen perhaps you would like to share? If you have an older model truck the plastic in the tail light may be a little brittle so be careful. I believe this is why GFC stopped installing the brake light. I’m not sure if the color of my wires are the same as in every truck but maybe for all 2nd gen tacos. You don’t have to cut any wires. It screws in…