Finally finished my downstairs lights.
I modeled up and 3d printed a channel mount that uses the existing screws in the GFC. The back of this has a captured nut and I put double sided tape on the portions that contact the camper:
Channel Mounts installed:
I cut my channel to size and marked hole using a drilling jig I made:
LED Channel Installed:
I built a wiring harness that splits between the front channel and the passenger side. Power continues from the front channel to the driver side. Once the LEDs were installed into the channel I wired up my LED controller to my Redarc Rogue. This will allow me to control the lights from my display, a bluetooth app on my phone, or the RF remote:
Finished product. These are RGB-CCT so I have any color I want, warm white, cool white, and dimming:
Parts List:
RBG-CCT Lights
Wiring
LED Controller and Remote
LED Connectors
LED Channel
Captured Nuts