3 Likes
Likely #991, 3433 is your invoice #
Oh geez that sounds way better! Lol
I wasn’t sure where to find the build #
I have some of the early 2nd gen Tacoma KB Voodoo steel bedside caps. They fit well, and it’s easy to seal the gaps in the bed side with aluminum tape, then run a bead of caulk between the bed cap and bed side to seal everything. I filled the holes in the KBV caps (they don’t come that way now) with caulk, too. I wanted to finish off a tube, so I also ran a bead along the outer edge of the bed cap to give it a cleaner look. Whatever gets into the bed space isn’t coming through there.
As far as KB Voodoo goes, some very early parts suffered from rough cuts on the plasma table (or whatever process was used), and the paint wasn’t very good. Changes were made by the time I bought the bedside caps, and mine have clean cuts, and are rust free after several years. I recently bought an aluminum bed cap to replace my old steel one, and it’s a nice part. Chad offered to replace the rusty steel cap years ago, but I was banging it up often enough with tools that I didn’t see the point.
Nice build Shay! As usual I’m late to the cool kids club but I’m here now
1 Like
6 Likes
After a backcountry ski trip a few weeks ago I found my truck twin in the parking lot. Two DCLB, inferno orange, with GFCs. Hoping to grab a beer with the other owner one of these days.
6 Likes
What’s up with the tape on the gfc door?
Not sure. My truck is in the background. I haven’t had a chance to meet up with the other owner yet.
Damn quite the awning setup behind ya
I hear ya brother. in the same drifting boat except you have install date and I am day 17 of soft goods install of which 11 are work days. very nice lines on your rig. I have always liked white with place trim
1 Like
By the looks of that truck it is an OG GFC so he’s probably having hinge issues and scared the doors are going to fall off.
1 Like
Yeah- that thing ain’t no joke. You can have a congregation under it- it was nice to have out there!
Anybody else having trouble opening new posts on this forum?
Seems to be working fine for me, but this is eight hours after you asked.
Thanks,
It seems to be working better now.
1 Like