Updated my fridge… it’s a little on the small side but the only drawer fridge I could find that would work with my drawer…
Trying to keep as much space in the bed for hanging out.
1 Like
If you make the back drawer the right height and length… you got enough room for 7days of clothes,a seat and pretty much a full single bed… without the buildout
I carry a duffel bag of work clothes so I just use that to finish the bed…
It’s under construction right now so I don’t have it completely put back together but here’s a few pictures.
.
.
Saves weight and room.
That is on a long bed Tacoma though
1 Like
I am sure this is buried somewhere in the forum but I fixed my high pitched whistle back in March with the most simple of things. I was toilet thinking one day and realized the drain hole above the cab was acting like a pop botte when you blow in it. I figured I would disrupt the wind with tape and it cleared all the horrendous noise I was getting from the GFC.
Rolled tape stuck to the back side of flex tape.
Placed in front of hole.
Not perfect but 100% effective, and it keeps the drain working.
3 Likes
Nice fix! I know in the past if you reached out to GFC Service they would send a 3D printed solution to this at no cost (Don’t know if they still do). It fits into the hole and basically does the same thing you did.
1 Like
Ah good to know. I have a fairy early build 1500 or so and I am sure it was discussed before. I just couldn’t for the life of me figure out where it was coming from. It also didn’t do it until about 6 months after getting it, from another member.
1 Like
Sweet thanks. I think I like my tape fix a little better. Lower profile.
1 Like
Built a shelf that sits against the cab window. I’ve had this idea in my head for awhile, but finally got around to building it in the last couple of weeks. I keep a crate with my propane tank and other truck essentials, plus camping chairs, in the back nearly all the time, so I was looking to create a shelf above all that where I could set/place items when I’m camping. This is also where my Goal Zero will live. The whole thing is pretty simple, just held in place by gravity and a little bit of line.
I have yet to take it on a weekend trip, but will follow up if there’s anything that goes awry.
5 Likes
Added my heater quick connect! Tried to upload a 21mb video of it but alas the site doesn’t like it.
2 Likes
no pictures but just did water intrusion kit tonight by myself (received the kit in March… been lazy about it lol). Doable solo with the GFC mounted on a lifted truck, but not recommended.
some sections of the tape on the roof panel are not straight lol
1 Like
Is it just the lock barrels that switch out?
The entire latch needs to be swapped, you can’t swap just the core/cylinder.
1 Like
Thanks. I’ll reach out and try to get the replacement locks. I appreciate the info and your post letting us know this is possible.
1 Like
I switched out my whole assemblies to a different one and have full sets of the originals if anybody wants them happy to give them away, give me an address and I’ll send them to you
I’m curious which ones you switched to? These originals suck.
I run something similar, but sits on the wheel wells. The lip is key to keeping things in place. I also use milk crates for easy and sturdy organization.
got some uninvited guests on the GFC today:
2 Likes
Has anyone wrapped their panel before? would like to give mine some new life. Any insighton this?
