This is cool. Nice work
I need one of those, so i can run my heater into the tent, instead of through the bed. Think you could print it?
Word of caution: I’d verify 3D Printed fillament in a hot environment for off-gassing of toxic fumes.
-Ron
4 Likes
Yeah, I wouldn’t do a 3d printed connection for the heat end
That vent looks very interesting…is that a DIY product or do you have a source for them? Seems that could help quite a bit with condensation.
It was getting harder and harder to live in the camper as I’ve accumulated stuff that’s essential for living and that takes up all the foot space in the bed so I decided to pull the trigger on a rear seat delete and transfer most of the stuff over so I can get some space back…. A bit spendy but the quality is top-notch
It’s amazing how much space you get by getting rid of the seat cushions
11 Likes
That looks sick! I’ve been thinking of building my own 1/3 seat delete in my Ram. The other two spots (middle, passenger) are reserved for booster and car seats for now.
But I agree, I think you can gain significant storage space by removing the seats.
1 Like
Looks like you just made it more aero.
2 Likes
I mounted some chalk bags in the back of the Tacoma today to use as drink holders and a convenient spot to stash ski wax, small tools, and other small items. I modified some weld on nuts so I can mount them easily i between the GFC mounts.
7 Likes
Cleaned up the external cable routing for my solar with @shitco cable clamps. A couple doubles and some singles got my sh*t cleaned up.
5 Likes
Is there a flux capacitor somewhere in there as well? 
Got a set of the Ironman4x4 area lights as part of their Black Friday sale and installed a permanent mount on the side of the GFC that screws in the telescoping 10 foot pole as needed…. This thing throws out some serious light!
1 Like
Do those curtains you linked from Amazon have the channel for the bungy on the top and bottom? Or did you have to do some sewing?
The channels are built in…. All plug and play… just thread the paracord through and Bob’s your uncle
1 Like
I bought the same curtain as @OverlandKyle and it has channels top & bottom. All you got to do is thread some cord through. One of the easiest mods ever!
1 Like
Built and wired in some DC power into my truck bed to power my fridge or any 12V accessory and charge phones or any USB accessory. Just tapped into the 7 pin trailer harness for constant 30 amp fused 12V power with the harness extension below to wire to the Accessory panel. The box was an extra electronic project box I had laying around. I may mount the panel direct to the side wall of the truck bed, but I was trying to avoid cutting into the bed.
LEQUDUO 56070 7-Foot 7-Pin Trailer Wiring Harness Extension
Blue Sea Systems 4366 Water-Resistant Accessory Panel with Circuit Breaker, 12V Socket, Dual USB Charger, Mini Voltmeter
1 Like
Excellent! Ordered
Nice! Are you having any issues with your fridge powering off?